Sign in to follow this  
Langford

Raptor 700 Specs

4 posts in this topic

Raptor 700 Specs:

 

Dimensions:

 

Overall Length:  1,845 mm (72.6 in)

Overall width:  1,170 mm (46.1 in)
Overall height:  1,130 mm (44.5 in)
Seat height:  815 mm (32.1 in)
Wheelbase:  1,280 mm (50.4 in)
Minimum ground clearance:  240 mm (9.45 in)
Minimum turning radius:  3,500 mm (137.8 in)

 

Weight:


With oil and full fuel tank 192 kg (423 lb)

 

Engine:

 

Engine Type:  Liquid Cooled 4-stroke, sohc

Cylinder arrangement:  Forward-inclined single cylinder
Displacement:  686 cm3 (41.86 cu in)
Bore × stroke:  102.0 × 84.0 mm (4.02 × 3.31 in)
Compression ratio:  9.20:1
Standard compression pressure (at sea level):  450 kPa (4.5 kg/cm2, 64.0 psi)
Starting system:  Electric starter

 

Lubrication System:

 

Dry Sump

 

Oil Capacity:

 

Periodic oil change:  1.75 L (1.54 Imp qt, 1.85 US qt)
With oil filter replacement:  1.85 L (1.63 Imp qt, 1.96 US qt)
Total amount:  2.30 L (2.02 Imp qt, 2.43 US qt)

 

Radiator Capacity (including all routes):

 

1.61 L (1.42 Imp qt, 1.70 US qt)

 

Fuel:

 

Type:  Regular Unleaded Gasoline

Capacity:  11.0 L (2.42 Imp gal, 2.91 US gal)

 

Fuel Injector:

 

Type/quantity: 297500-0390/1

Manufacturer:  DENSO

 

Spark Plug:

 

Type/manufacturer:  CR8E/NGK
Spark plug gap:  0.7 ~ 0.8 mm (0.028 ~ 0.031 in)

 

Transmission:

 

Primary reduction system:  Spur gear
Primary reduction ratio:  77/34 (2.265)
Secondary reduction system:  Chain drive
Secondary reduction ratio:  38/14 (2.714)
Transmission type:  Constant mesh, 5-speed/forward, 1 speed/reverse
Operation:  Left foot operation


Gear ratio


1st gear 38/13 (2.923)
2nd gear 28/14 (2.000)
3rd gear 25/17 (1.471)
4th gear 25/22 (1.136)
5th gear 22/24 (0.917)
Reverse gear 24/13 × 29/12 (4.462)

 

 

Chassis:

 

Frame type:  Aluminum die-cast and steel tube frame
Caster angle:  5°
Camber angle:  –1.0°
Kingpin angle:  14.8°
Kingpin offset:  2.8 mm (0.11 in)
Trail:  21.0 mm (0.83 in)
Tread front (STD):  940 mm (37.01 in)
Tread rear (STD):  900 mm (35.43 in)
Toe-in:  (with tires touching the ground) 2 ~ 12 mm (0.08 ~ 0.47 in)

 

Tires:

 

Type: Tubeless
Size front:  AT21 × 7-10
Size rear:  AT20 × 10-9
Manufacturer front: DUNLOP
Manufacturer rear:  DUNLOP
Type front: KT341 Radial
Type rear:  KT345 Radial

 

Wheel Travel:

 

Front wheel travel:  230 mm (9.06 in)
Rear wheel travel:  256 mm (10.08 in)

 

 

Share this post


Link to post
Share on other sites

That's all out of the 700 service manual...not year specific.  It should be the same for the '06-'12, not sure if they changed anything for the '13 models or not. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this